Injection In Mould Labelling Robot

Product Details:

The techno imm series robot caters to the injection moulding segment. Our versatile robots can be used for take out ,atricle insertion as well as in mould labelling.

we have 2 types of robots :
a 2 axis side entry robot as well as 3 axis top entry robot.

salient features :
* 3 axis servo controlled motion
* motion controller based operation system
* manufectured in india, so no problem of spares after sales
* universal type  magazine to minimise change parts cost
* available with takeout unit
* available with euro map 67 interface
* equipped with european make static charger.

Additional Information:

• Production Capacity: Cycle Time 2 second with Takeout system
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle time 2 second with Take out System
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene Wrapping or wooden Box

Product Details:

The Techno IMM Series ROBOT Caters to the Injection Moulding Segment. Our Versatile Robots can be used for Take Out ,Atricle Insertion as well as IN MOULD LABELLING.

We Have 2 Types of Robots :
A 2 Axis Side Entry Robot As well as 3 Axis Top Entry Robot.

SALIENT FEATURES :
* 3 Axis Servo Controlled Motion
* Motion Controller Based Operation System
* Manufectured In India, So No Problem Of Spares After Sales
* Universal Type  Magazine To Minimise Change Parts Cost
* Available With Takeout Unit
* Available With Euro Map 67 Interface
* Equipped With European Make Static Charger.

Additional Information:

• Production Capacity: Cycle Time 2 second with takeout
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

The techno imm series robot caters to the injection moulding segment. Our versatile robots can be used for take out ,atricle insertion as well as in mould labelling.

we have 2 types of robots :
a 2 axis side entry robot as well as 3 axis top entry robot.

salient features :
* 3 axis servo controlled motion
* motion controller based operation system
* manufectured in india, so no problem of spares after sales
* universal type  magazine to minimise change parts cost
* available with takeout unit
* available with euro map 67 interface
* equipped with european make static charger.

Additional Information:

• Production Capacity: Cycle Time 2 Second with takeout system
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene wrapping or Wooden Box

Product Details:

The techno imm series robot caters to the injection moulding segment. Our versatile robots can be used for take out ,atricle insertion as well as in mould labelling.

we have 2 types of robots :
a 2 axis side entry robot as well as 3 axis top entry robot.

salient features :
* 3 axis servo controlled motion
* motion controller based operation system
* manufectured in india, so no problem of spares after sales
* universal type  magazine to minimise change parts cost
* available with takeout unit
* available with euro map 67 interface
* equipped with european make static charger.

Additional Information:

• Production Capacity: Cycle Time 2 Second with Take out System
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene Wrapping or wooden box

Product Details:

The Techno IMM Series ROBOT Caters to the Injection Moulding Segment. Our Versatile Robots can be used for Take Out ,Atricle Insertion as well as IN MOULD LABELLING.

We Have 2 Types of Robots :
A 2 Axis Side Entry Robot As well as 3 Axis Top Entry Robot.

SALIENT FEATURES :
* 3 Axis Servo Controlled Motion
* Motion Controller Based Operation System
* Manufactured In India, So No Problem Of Spares After Sales
* Universal Type  Magazine To Minimise Change Parts Cost
* Available With Takeout Unit
* Available With Euro Map 67 Interface
* Equipped With European Make Static Charger.

Additional Information:

• Production Capacity: Cycle Time 2 second with Takeout system
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

The techno imm series robot caters to the injection moulding segment. Our versatile robots can be used for take out ,atricle insertion as well as in mould labelling.

we have 2 types of robots :
a 2 axis side entry robot as well as 3 axis top entry robot.

salient features :
* 3 axis servo controlled motion
* motion controller based operation system
* manufectured in india, so no problem of spares after sales
* universal type  magazine to minimise change parts cost
* available with takeout unit
* available with euro map 67 interface
* equipped with european make static charger.

Additional Information:

• Production Capacity: Cycle time 2 second with takeout
• Delivery Time: 4 to 5 week
• Packaging Details: Polythene wrapping or Wooden Box

Product Details:

The techno imm series robot caters to the injection moulding segment. Our versatile robots can be used for take out ,atricle insertion as well as in mould labelling.

we have 2 types of robots :
a 2 axis side entry robot as well as 3 axis top entry robot.

salient features :
* 3 axis servo controlled motion
* motion controller based operation system
* manufectured in india, so no problem of spares after sales
* universal type  magazine to minimise change parts cost
* available with takeout unit
* available with euro map 67 interface
* equipped with european make static charger.

Additional Information:

• Production Capacity: 2 second Cycle time with take out
• Delivery Time: 4 to 5 Week
• Packaging Details: Polythene wrapping or Wooden box

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle Time 2 Second with Takeout System
• Delivery Time: 4 TO 6 week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle Time 2 Second with Takeout System
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle Time 2 second with Takeout System
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle Time 2 Second with Takeout System
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle time 2 second with Takeout System
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene wrapping or Wooden Box

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle time 2 Second with Takeout System
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene Wrapping or wooden Box

Product Details:

The techno imm series robot caters to the injection moulding segment. Our versatile robots can be used for take out ,atricle insertion as well as in mould labelling.

we have 2 types of robots :
a 2 axis side entry robot as well as 3 axis top entry robot.

salient features :
* 3 axis servo controlled motion
* motion controller based operation system
* manufectured in india, so no problem of spares after sales
* universal type  magazine to minimise change parts cost
* available with takeout unit
* available with euro map 67 interface
* equipped with european make static charger.

Additional Information:

• Production Capacity: Cycle time 2 second with takeout
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene wrapping or Wooden Box