In Mould Labelling Robot IML NANO UREA BOTTLE

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: 2 second cycle time
• Delivery Time: 4 to 5 week

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle time 2 Second with Takeout System
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

The techno imm series robot caters to the injection moulding segment. Our versatile robots can be used for take out ,atricle insertion as well as in mould labelling.

we have 2 types of robots :
a 2 axis side entry robot as well as 3 axis top entry robot.

salient features :
* 3 axis servo controlled motion
* motion controller based operation system
* manufectured in india, so no problem of spares after sales
* universal type  magazine to minimise change parts cost
* available with takeout unit
* available with euro map 67 interface
* equipped with european make static charger.

Additional Information:

• Item Code: IML
• Production Capacity: Cycle Time 2 Second
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene wrapping or wooden box

Product Details:

PROCESS
1. The labels are First Stacked inthe Magazine.The Robot Arms at the Home Position.
2. The Arms then Go Forwarded and Picks up the labels up the Labels Using a Vacuum Plucker.
3. After Picking Up the Labels the Arms wait for the Mould Open Signal.
4. When Mould Open Sigmal is Received the RobotGoes Inside the Mould and Places the sticker.
5. The Size of Magazine Depands on the No. Of Cavity in the Mould. The IN Mould Label Robot has to work in Syncronised with Moulding Machine.
     For SafeOperation Procedure Feedback is taken  the Moulding Machine At all Important Stage for Safe Operation.

MACHINE FEATURES :
* Servo Controlled X And Y Axis Movement
* Easy To Use Interface Fro Setting Parameter
* Reduced Magazine Refill Time
* Aluminium Mono Block Construction Of The End Of Arm Tool
* Rack And Pinion With Tie Rod Supported Carriage Forstables As Well As Accurate Motion Transfer
* Feedback Taken For Home, Place And Wait Position Cross Checked Via Sensors.
* Rotating Control Panel For Ease Of Access And Navigation

Additional Information:

• Production Capacity: Cycle time 2 second
• Delivery Time: 4 to 5 week

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Product Details:

The Techno Inmold Label Robot Uni series is a machine designed specifically for Ferromatic UMS 100 Series . The Robot is additional to placing the labels inside the mould also picks up the bottles from the deflashing stage .

Machine Feature

• Servo Controlled X and Y axis movement
• Easy to use interface for setting parameters
• Reduce magazine Refill time
• Heavy Machine frame for increase sturdiness and stability
• Top Mounted arm for enabling of conveyor placement under the robotic arm

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Product Details:

The techno in-mould labeling machine can be used synchronously with a blow moulding machine to a preprinted polypropylene (PP) label is placed in a mould. The main aim of our R & D teams was to design a steady machine which is met by the machine's heavy-duty m.s.chassis thereby reducing vibrations and improving the machine’s stability. Entry inside the mould can be given through both parison side as well as blow pin side.

Features:

• Sturdy frame thereby ensuring vibration-less operation.
• High production rate.
• Can be attached at both the ends of the blow moulding machine.
• Very compact dimensions.
• Servo motor driven for accurate indexing.
• PLC controlled for making minute adjustments.
• User friendly operations.

Product Details:

Process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle Time 2 Second
• Delivery Time: 4 to 5 Week

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle time 2 second
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene wrapping

Product Details:

The techno imm series robot caters to the injection moulding segment. Our versatile robots can be used for take out ,atricle insertion as well as in mould labelling.

we have 2 types of robots :
a 2 axis side entry robot as well as 3 axis top entry robot.

salient features :
* 3 axis servo controlled motion
* motion controller based operation system
* manufectured in india, so no problem of spares after sales
* universal type  magazine to minimise change parts cost
* available with takeout unit
* available with euro map 67 interface
* equipped with european make static charger.

Additional Information:

• Production Capacity: Cycle Time 2 second with Takeout system
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

The techno in-mould labeling machine can be used synchronously with a blow moulding machine to a preprinted polypropylene (PP) label is placed in a mould. The main aim of our R & D teams was to design a steady machine which is met by the machine's heavy-duty m.s.chassis thereby reducing vibrations and improving the machine’s stability. Entry inside the mould can be given through both parison side as well as blow pin side.

Features:

• Sturdy frame thereby ensuring vibration-less operation.
• High production rate.
• Can be attached at both the ends of the blow moulding machine.
• Very compact dimensions.
• Servo motor driven for accurate indexing.
• PLC controlled for making minute adjustments.
• User friendly operations.

Additional Information:

• Production Capacity: 2 second Cycle
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

We are one of the widely acclaimed manufacturers, exporters and suppliers of In Mould Labelling Robot. The offered in-mold labelling robot is specially designed for labelling the objects such as bottles and containers. Our manufactured in-mold labelling robot is a heard wearing construct, which can impart sharp ink impressions onto the substrates. The supplied in-mold labelling robot is available at very cost effective and economic market selling price.

Features:
 Easy to operate
 Sharp ink registrations  Durable fabrication

Other Details:
 Sturdy mechanical construction.
 All of the part surfaces that are in direct contact with the bottles are manufactured with
 Stainless steel to avoid any damage to bottles.
 Highly flexible and capable of handling a wide range of sizes and bottles profiles.
 Simplified bottle format change-over operation featuring robust quick-release features.
 Recognized major brand electrical and electronic components are used to provide the utmost in reliability and availability for replacement to the worldwide marketplace all motors have variable speed controlled by variable frequency drives.

Product Details:

The techno in-mould labeling machine can be used synchronously with a blow moulding machine to a preprinted polypropylene (PP) label is placed in a mould. The main aim of our R & D teams was to design a steady machine which is met by the machine's heavy-duty m.s.chassis thereby reducing vibrations and improving the machine's stability. Entry inside the mould can be given through both parison side as well as blow pin side.

Features:

• Sturdy frame thereby ensuring vibration-less operation.
• High production rate
• Can be attached at both the ends of the blow moulding machine
• Very compact dimensions
• Servo motor driven for accurate indexing
• PLC controlled for making minute adjustments
• User friendly operations

 

Product Details:

The techno in-mould labeling machine can be used synchronously with a blow moulding machine to a preprinted polypropylene (PP) label is placed in a mould. The main aim of our R & D teams was to design a steady machine which is met by the machine's heavy-duty m.s.chassis thereby reducing vibrations and improving the machine’s stability. Entry inside the mould can be given through both parison side as well as blow pin side.

Features:

• Sturdy frame thereby ensuring vibration-less operation.
• High production rate
• Can be attached at both the ends of the blow moulding machine
• Very compact dimensions
• Servo motor driven for accurate indexing
• PLC controlled for making minute adjustments
• User friendly operations

 

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: cycle time 2 sec
• Delivery Time: 4 to 5 Week

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle time 2 second
• Delivery Time: 4 to 5 week

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: cycle time 2 second max.
• Delivery Time: 4 to 5 week
• Packaging Details: Polythene Wrapping or wooden cage packing

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle time 2 sec
• Delivery Time: 4 to 5 week
• Packaging Details: In mould labeling

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle time 2 second with Takeout system
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle time 2 second
• Delivery Time: 4 to 5 week

Product Details:

The techno imm series robot caters to the injection moulding segment. Our versatile robots can be used for take out ,atricle insertion as well as in mould labelling.

we have 2 types of robots :
a 2 axis side entry robot as well as 3 axis top entry robot.

salient features :
* 3 axis servo controlled motion
* motion controller based operation system
* manufectured in india, so no problem of spares after sales
* universal type  magazine to minimise change parts cost
* available with takeout unit
* available with euro map 67 interface
* equipped with european make static charger.

Additional Information:

• Production Capacity: Cycle Time 2 second with Takeout system
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene wrapping or Wooden Box

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle Time 2 Second with Takeout System
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

The Techno IMM Series ROBOT Caters to the Injection Moulding Segment. Our Versatile Robots can be used for Take Out ,Atricle Insertion as well as IN MOULD LABELLING.

We Have 2 Types of Robots :
A 2 Axis Side Entry Robot As well as 3 Axis Top Entry Robot.

SALIENT FEATURES :
* 3 Axis Servo Controlled Motion
* Motion Controller Based Operation System
* Manufectured In India, So No Problem Of Spares After Sales
* Universal Type  Magazine To Minimise Change Parts Cost
* Available With Takeout Unit
* Available With Euro Map 67 Interface
* Equipped With European Make Static Charger.

Additional Information:

• Production Capacity: Cycle Time 2 Second with Takeout System
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

The Techno IMM Series ROBOT Caters to the Injection Moulding Segment. Our Versatile Robots can be used for Take Out ,Atricle Insertion as well as IN MOULD LABELLING.

We Have 2 Types of Robots :
A 2 Axis Side Entry Robot As well as 3 Axis Top Entry Robot.

SALIENT FEATURES :
* 3 Axis Servo Controlled Motion
* Motion Controller Based Operation System
* Manufectured In India, So No Problem Of Spares After Sales
* Universal Type  Magazine To Minimise Change Parts Cost
* Available With Takeout Unit
* Available With Euro Map 67 Interface
* Equipped With European Make Static Charger.

Additional Information:

• Production Capacity: Cycle Time 2 second with Takeout System
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

The Techno IMM Series ROBOT Caters to the Injection Moulding Segment. Our Versatile Robots can be used for Take Out ,Atricle Insertion as well as IN MOULD LABELLING.

We Have 2 Types of Robots :
A 2 Axis Side Entry Robot As well as 3 Axis Top Entry Robot.

SALIENT FEATURES :
* 3 Axis Servo Controlled Motion
* Motion Controller Based Operation System
* Manufactured In India, So No Problem Of Spares After Sales
* Universal Type  Magazine To Minimise Change Parts Cost
* Available With Takeout Unit
* Available With Euro Map 67 Interface
* Equipped With European Make Static Charger.

Additional Information:

• Production Capacity: Cycle time 2 second with Take out system
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene wrapping or Wooden Box

Product Details:

The Techno IMM Series ROBOT Caters to the Injection Moulding Segment. Our Versatile Robots can be used for Take Out ,Atricle Insertion as well as IN MOULD LABELLING.

We Have 2 Types of Robots :
A 2 Axis Side Entry Robot As well as 3 Axis Top Entry Robot.

SALIENT FEATURES :
* 3 Axis Servo Controlled Motion
* Motion Controller Based Operation System
* Manufectured In India, So No Problem Of Spares After Sales
* Universal Type  Magazine To Minimise Change Parts Cost
* Available With Takeout Unit
* Available With Euro Map 67 Interface
* Equipped With European Make Static Charger.

Additional Information:

• Production Capacity: Cycle time 2 Second with Take out System
• Delivery Time: 5 to 6 week
• Packaging Details: Polythene Wrapping and Wooden Box

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle Time 2 second with Take out System
• Delivery Time: $ to 6 week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

The techno imm series robot caters to the injection moulding segment. Our versatile robots can be used for take out ,atricle insertion as well as in mould labelling.

we have 2 types of robots :
a 2 axis side entry robot as well as 3 axis top entry robot.

salient features :
* 3 axis servo controlled motion
* motion controller based operation system
* manufectured in india, so no problem of spares after sales
* universal type  magazine to minimise change parts cost
* available with takeout unit
* available with euro map 67 interface
* equipped with european make static charger.

Additional Information:

• Production Capacity: Cycle Time 2 second with Takeout System
• Delivery Time: 4 to 6 week
• Packaging Details: Polythene Wrapping or wooden Box

Product Details:

The techno in-mould labeling machine can be used synchronously with a blow moulding machine to a preprinted polypropylene (PP) label is placed in a mould. The main aim of our R & D teams was to design a steady machine which is met by the machine's heavy-duty m.s.chassis thereby reducing vibrations and improving the machine’s stability. Entry inside the mould can be given through both parison side as well as blow pin side.

Features:

• Sturdy frame thereby ensuring vibration-less operation.
• High production rate.
• Can be attached at both the ends of the blow moulding machine.
• Very compact dimensions.
• Servo motor driven for accurate indexing.
• PLC controlled for making minute adjustments.
• User friendly operations.

Product Details:

The techno in-mould labeling machine can be used synchronously with a blow moulding machine to a preprinted polypropylene (PP) label is placed in a mould. The main aim of our R & D teams was to design a steady machine which is met by the machine's heavy-duty m.s.chassis thereby reducing vibrations and improving the machine’s stability. Entry inside the mould can be given through both parison side as well as blow pin side.

Features:

• Sturdy frame thereby ensuring vibration-less operation.
• High production rate.
• Can be attached at both the ends of the blow moulding machine.
• Very compact dimensions.
• Servo motor driven for accurate indexing.
• PLC controlled for making minute adjustments.
• User friendly operations.

Additional Information:

• Production Capacity: Cycle time 2 Second
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene Wrapping or Wooden Box

Product Details:

process
1. The labels are first stacked inthe magazine. The robot arms at the home position.
2. The arms then go forwarded and picks up the labels up the labels using a vacuum plucker.
3. After picking up the labels the arms wait for the mould open signal.
4. When mould open sigmal is received the robotgoes inside the mould and places the sticker.
5. The size of magazine depands on the no. Of cavity in the mould. The in mould label robot has to work in syncronised with moulding machine.
     for safeoperation procedure feedback is taken  the moulding machine at all important stage for safe operation.

machine features :
* servo controlled x and y axis movement
* easy to use interface fro setting parameter
* reduced magazine refill time
* aluminium mono block construction of the end of arm tool
* rack and pinion with tie rod supported carriage forstables as well as accurate motion transfer
* feedback taken for home, place and wait position cross checked via sensors.
* rotating control panel for ease of access and navigation

Additional Information:

• Production Capacity: Cycle time 2 Second with Takeout System
• Delivery Time: 4 to 6 Week
• Packaging Details: Polythene Wrapping or Wooden Box